editor's blog
Subscribe Now

And the Ecosystem Starts

In today’s discussion of the move to 450-mm wafers, we looked at one of the first pieces of equipment that will initiate the entire development cascade necessary for handling these new behemoths. That’s what makes a wafer change so different from other transitions.

When we move from one silicon node to another, we typically have to replace a few pieces of equipment in the line, add some more for any new steps, and maybe swap out some parts of an existing tool. Not to minimize those things – they can be critical and expensive things to do.

But when the wafer size changes, you end up throwing everything out unless you’re really lucky (dual-size equipment can help soften the blow, but it still replaces the older single-size unit). It’s not just the fact that the size changes, but, more specifically, the fact that it’s getting bigger. Handlers and clearances and reaction chambers set up for older, smaller wafers will not likely be able to handle the new ones – even if the chemistry hasn’t changed.

That’s not to suggest that a wafer size change is only about making more room; as we saw, the size of the wafers brings new challenges of its own in addition to the simple fact of a new, bigger elephant in the fab.

The details that this involves were brought clearly home to me as I was writing the other piece. A press release came in announcing that Hine Automation had released its new STAR SL-450 automated load locks for 450-mm wafers. One of many, many such details that will need to be sorted to get an entire line outfitted for 450 mm.

Leave a Reply

featured blogs
Jul 11, 2025
Can you help me track down the source of the poem titled 'The African Tigger is Fading Away'?...

Libby's Lab

Libby's Lab - Scopes out Eaton EHBSA Aluminum Organic Polymer Capacitors

Sponsored by Mouser Electronics and Eaton

Join Libby and Demo in this episode of “Libby’s Lab” as they explore the Eaton EHBSA Aluminum Organic Polymer Capacitors, available at Mouser.com! These capacitors are ideal for high-reliability and long life in demanding applications. Keep your circuits charged and your ideas sparking!

Click here for more information

featured paper

Agilex™ 3 vs. Certus-N2 Devices: Head-to-Head Benchmarking on 10 OpenCores Designs

Sponsored by Altera

Explore how Agilex™ 3 FPGAs deliver up to 2.4× higher performance and 30% lower power than comparable low-cost FPGAs in embedded applications. This white paper benchmarks real workloads, highlights key architectural advantages, and shows how Agilex 3 enables efficient AI, vision, and control systems with headroom to scale.

Click to read more

featured chalk talk

High Power Charging Inlets
All major truck and bus OEMs will be launching electric vehicle platforms within the next few years and in order to keep pace with on-highway and off-highway EV innovation, our charging inlets must also provide the voltage, current and charging requirements needed for these vehicles. In this episode of Chalk Talk, Amelia Dalton and Drew Reetz from TE Connectivity investigate charging inlet design considerations for the next generation of industrial and commercial transportation, the differences between AC only charging and fast charge and high power charging inlets, and the benefits that TE Connectivity’s ICT high power charging inlets bring to these kinds of designs.
Aug 30, 2024
36,220 views