industry news
Subscribe Now

Dual Differential Amplifier/ADC Driver Delivers 10GHz Gain Bandwidth with 1.1nV/?Hz Noise

MILPITAS, CA & NORWOOD, MA – March 22, 2017 – Analog Devices, Inc., which recently acquired Linear Technology Corporation, announces the LTC6419, a dual 10GHz gain bandwidth product differential amplifier with very low input voltage noise density of 1.1nV/?Hz, delivering outstanding SNR performance for wideband signal amplification. Additionally, the LTC6419 offers low distortion, providing 85dB spurious-free dynamic range (SFDR) at 100MHz while driving 2VP-P signals. Four external resistors set the differential gain of each amplifier, configurable from unity gain with frequency response beyond 1GHz, to gain of 100 with bandwidth of 100MHz, and up to a maximum gain of 400 with bandwidth of 30MHz. At these high frequencies, the LTC6419 offers significantly better channel-to-channel isolation of 95dB at 100MHz than other similar class dual amplifiers. Also its wide DC common mode voltage ranges, 0V to 3.5V at the input, and 0.5V to 3.5V at the output, make the part particularly useful in DC coupled applications interfacing between two dissimilar DC levels, such as from the outputs of an I/Q demodulator to the inputs of analog-to-digital (A/D) converters.

The LTC6419 dual differential amplifier, with its DC coupling, low noise and high bandwidth capabilities, is well suited for many applications such as direct conversion receivers, driving high sample rate ADCs, high speed data acquisition systems, test instrumentation, high resolution radar systems, advanced image sensors and LIDAR systems.

The LTC6419 has a supply voltage range from 2.7V to 5.25V. Each amplifier also has a shutdown pin, so each amplifier can be enabled independently, drawing a nominal supply current of 52mA. When disabled, the supply current reduces to 100?A per amplifier.

The LTC6419 is offered in a small 4mm x 3mm x 0.75mm, 20-lead LQFN plastic package. Two grades are offered: an I grade rated from –40°C to 85°C and an H grade from –40°C to 125°C. The LTC6419 I grade is priced starting at $8.50 and the H grade starting at $9.90 each in 1,000-pieces quantities. Both are available immediately in production quantities. For more information, visit www.linear.com/product/LTC6419.

Summary of Features: LTC6419

• Configurable Gain and Bandwidth: Unity Gain at 1.4GHz
Gain = 100 at 100MHz
Gain = 400 at 30MHz
• 1.1nV/Hz Input Voltage Noise Density with 40kHz Noise Corner Frequency
• Wide DC Common Mode Voltage Range:
? Input 0V to 3.5V
? Output: 0.5V to 3.5V
• Channel Separation 95dB at 100MHz
• Industrial and High Temperature Grades Offered:
? I Grade:
? H Grade: –40°C to 85°C
–40°C to 125°C

Pricing shown is for budgetary use only and may differ due to local duties, taxes, fees and exchange rates.

Analog Devices just got more Powerful. On March 10, Analog Devices acquired Linear Technology, creating the premier high performance analog company. More info at http://lt.linear.com/07c

About Analog Devices

Analog Devices (NASDAQ: ADI) is the leading global high-performance analog technology company dedicated to solving the toughest engineering challenges. We enable our customers to interpret the world around us by intelligently bridging the physical and digital with unmatched technologies that sense, measure, power, connect and interpret. Visit http://www.analog.com.

 

Leave a Reply

featured blogs
Apr 26, 2024
LEGO ® is the world's most famous toy brand. The experience of playing with these toys has endured over the years because of the innumerable possibilities they allow us: from simple textbook models to wherever our imagination might take us. We have always been driven by ...
Apr 26, 2024
Biological-inspired developments result in LEDs that are 55% brighter, but 55% brighter than what?...
Apr 25, 2024
See how the UCIe protocol creates multi-die chips by connecting chiplets from different vendors and nodes, and learn about the role of IP and specifications.The post Want to Mix and Match Dies in a Single Package? UCIe Can Get You There appeared first on Chip Design....

featured video

How MediaTek Optimizes SI Design with Cadence Optimality Explorer and Clarity 3D Solver

Sponsored by Cadence Design Systems

In the era of 5G/6G communication, signal integrity (SI) design considerations are important in high-speed interface design. MediaTek’s design process usually relies on human intuition, but with Cadence’s Optimality Intelligent System Explorer and Clarity 3D Solver, they’ve increased design productivity by 75X. The Optimality Explorer’s AI technology not only improves productivity, but also provides helpful insights and answers.

Learn how MediaTek uses Cadence tools in SI design

featured paper

Designing Robust 5G Power Amplifiers for the Real World

Sponsored by Keysight

Simulating 5G power amplifier (PA) designs at the component and system levels with authentic modulation and high-fidelity behavioral models increases predictability, lowers risk, and shrinks schedules. Simulation software enables multi-technology layout and multi-domain analysis, evaluating the impacts of 5G PA design choices while delivering accurate results in a single virtual workspace. This application note delves into how authentic modulation enhances predictability and performance in 5G millimeter-wave systems.

Download now to revolutionize your design process.

featured chalk talk

Shift Left with Calibre
In this episode of Chalk Talk, Amelia Dalton and David Abercrombie from Siemens investigate the details of Calibre’s shift-left strategy. They take a closer look at how the tools and techniques in this design tool suite can help reduce signoff iterations and time to tapeout while also increasing design quality.
Nov 27, 2023
20,427 views