industry news
Subscribe Now

National Instruments Introduces Industry’s Highest Throughput PXI Frame Grabber

June 21, 2011 – National Instruments today announced the NI PXIe-1435 high-performance Camera Link frame grabber. Engineers can use the new module to integrate high-speed and high-resolution imaging into their PXI systems, the industry standard for automated test with more than 1,500 measurement modules available from more than 70 vendors. By combining high-throughput imaging with the benefits of off-the-shelf PXI measurement hardware, NI now offers full software-defined solutions for demanding automated test applications in industries such as consumer electronics, automotive and semiconductor.

The NI PXIe-1435 is the industry’s highest throughput PXI frame grabber and acquires from all Camera Link camera configurations, including 10-tap extended-full, with up to 850 MB/s of throughput. Engineers can power cameras through Power over Camera Link (PoCL)-enabled cables, eliminating the need for additional wires in deployment environments. The frame grabber also offers 512 MB of DDR2 onboard acquisition memory for added reliability in transferring large images without fear of data overflow. Onboard digital I/O includes four bidirectional transistor-transistor logic (TTL), two opto-isolated inputs and one quadrature encoder for triggering and communicating inspection results with automation devices.

The frame grabber incorporates the synchronization, timing, data streaming and processing capabilities of the PXI Express specification, and supports image processing on complementary field-programmable gate array (FPGA) boards to further boost system performance.

“The NI PXIe-1435 frame grabber further complements our capabilities in the PXI platform,” said Matt Friedman, National Instruments senior product manager for the PXI platform and PXISA board member. “The addition of high-performance imaging to our PXI offerings enhances our mixed-signal capabilities for high-end test systems.”

The high throughput and low latency of the Camera Link standard make the frame grabber ideal for line-scan image sensors, which engineers can use for surface inspection of large areas, including finding esthetic and functional defects in solar panels and dead pixels in flat panel displays. The NI PXIe-1435 frame grabber also works well in many industrial applications, such as fault analysis using a stop trigger to record images before and after an event on the factory floor, and medical device applications such as analyzing intricacies in movement and recording stimulus response in objects from heart valves to eye corneas. 

Engineers can program the new module using NI LabVIEW graphical development software and the NI Vision Development Module, a comprehensive library of imaging functions. They also can configure it using NI Vision Builder for Automated Inspection software, an easy-to-use, stand-alone package for fast development and simple maintenance. NI vision software helps engineers take advantage of hundreds of imaging processing algorithms, make decisions based on multiple inspection results, customize user interfaces and communicate results using I/O and industrial communication protocols.

Readers can visit www.ni.com/vision to learn more about the new module and NI vision products.

About National Instruments

National Instruments (www.ni.com) is transforming the way engineers and scientists design, prototype and deploy systems for measurement, automation and embedded applications. NI empowers customers with off-the-shelf software such as NI LabVIEW and modular cost-effective hardware, and sells to a broad base of more than 30,000 different companies worldwide, with its largest customer representing approximately 4 percent of revenue in 2010 and no one industry representing more than 15 percent of revenue. Headquartered in Austin, Texas, NI has approximately 5,500 employees and direct operations in more than 40 countries. For the past 12 years, FORTUNE magazine has named NI one of the 100 best companies to work for in America. 

Pricing and Contact Information

NI PXIe-1435 frame grabber Contact Sales: www.ni.com/contact
Priced* from $1,999; €1,949; ¥250,000 Tel: (800) 258-7022, Fax: (512) 683-9300
Web: www.ni.com/vision E-mail: info@ni.com

*All prices subject to change

###

Leave a Reply

featured blogs
Dec 19, 2024
Explore Concurrent Multiprotocol and examine the distinctions between CMP single channel, CMP with concurrent listening, and CMP with BLE Dynamic Multiprotocol....
Dec 20, 2024
Do you think the proton is formed from three quarks? Think again. It may be made from five, two of which are heavier than the proton itself!...

Libby's Lab

Libby's Lab - Scopes Out Littelfuse's SRP1 Solid State Relays

Sponsored by Mouser Electronics and Littelfuse

In this episode of Libby's Lab, Libby and Demo investigate quiet, reliable SRP1 solid state relays from Littelfuse availavble on Mouser.com. These multi-purpose relays give engineers a reliable, high-endurance alternative to mechanical relays that provide silent operation and superior uptime.

Click here for more information about Littelfuse SRP1 High-Endurance Solid-State Relays

featured chalk talk

Advances in Solar Energy and Battery Technology
Sponsored by Mouser Electronics and onsemi
Passive components will play an important part in the next generation of solar and energy storage systems. In this episode of Chalk Talk, Amelia Dalton, Prasad Paruchuri from onsemi, Walter Fusto from Würth Elektronik explore trends, challenges and solutions in solar and energy storage systems. They also examine EMI considerations for energy storage systems, the benefits that battery management systems bring to these kinds of designs and how passive components can make all the difference in solar and energy storage systems.
Aug 13, 2024
54,624 views