editor's blog
Subscribe Now

Getting Beyond “It Depends” for Certification

More and more electronics are going into places where they could cause real damage if they don’t work right. Things like airplanes and weapons and, in particular, the systems that control them. That goes for hardware and software.

So there are elaborate standards controlling how things have to be done in order to pass muster for such systems. DO-178, DO-278, and DO-254 are only the most visible of these. The problem is that the standards don’t actually tell you what has to be done. They outline a broad process for certification, but exactly what is supposed to happen relies on a key individual: the “designated engineering representative,” or DER.

If you ask, in general, how you get a system certified, the answer is, “It depends.” And one of the things it depends on is the DER. You work with the DER to decide what you need to do for your system to be certified. And just because you did a particular set of things with one DER for one system doesn’t mean you can simply replicate that process with a different DER on another system. If the other DER has different ideas about how things should be done, then you have to go in that direction for the new project.

I (thankfully) don’t live in that particular world, but that’s got to be completely frustrating.

LDRA has offered up a Compliance Management System to help with this. It’s a certification process based on a particular individual, Todd White’s, 30 years of experience as a DER. It incorporates a system of checklists, matrices, and document templates intended to speed the certification process.

It works hand in hand with their certification consulting services, which are probably helpful to ensuring that this works most seamlessly. Using a different DER would, presumably, run the risk of that DER wanting something different. You would think, if these are truly proven elements for certification, that any reasonable DER would be happy to include them into a certification plan – unless they have their own system and insist on doing it their way.

So there’s still the possibility of some “it depends” in the mix, but the goal appears to be to remove some of it.

You can find out more in their recent release.

Leave a Reply

featured blogs
Jul 1, 2025
I don't know which of these videos is better: humans playing games with water pixels or robots playing games....

Libby's Lab

Libby's Lab - Scopes out Littelfuse C&K Aerospace AeroSplice Connectors

Sponsored by Mouser Electronics and Littelfuse

Join Libby and Demo in this episode of “Libby’s Lab” as they explore the Littelfuse C&K Aerospace Aerosplice Connectors, available at Mouser.com! These connectors are ideal for high-reliability easy-to-use wire-to-wire connections in aerospace applications. Keep your circuits charged and your ideas sparking!

Click here for more information

featured paper

AI-based Defect Detection System that is Both High Performance and Highly Accurate Implemented in Low-cost, Low-power FPGAs

Sponsored by Altera

Learn how MAX® 10 FPGAs enable real-time, high-accuracy AI-based defect detection at the industrial edge without a GPU. This white paper explores a production-proven solution that delivers 24× higher accuracy, 488× lower latency, and 20× lower power than traditional approaches, with a compact footprint ideal for embedded vision systems.

Click to read more

featured chalk talk

Enabling Tomorrow’s Sensor Applications Today
In this episode of Chalk Talk, Maureen Rakotondraibe from Sensirion, Tom Bocchino from STMicroelectronics and Amelia Dalton explore the synergies between STMicroelectronics and Sensirion and how their complementary technologies can encourage innovation in home automation and indoor air quality application design. They also investigate the details of STMicroelectronics new TMOS infrared sensor, the challenges associated with indoor air quality testing, and how you can take advantage of this innovative partnership for your next design. 
Jun 12, 2025
31,247 views