editor's blog
Subscribe Now

Wireless Phone Charging Without the Extra Antennas

Antenna_pic.jpgAbout a year ago, when we were in the wake of numerous wireless power announcements, we discussed a technology called “Cota” from a company called Ossia. The idea was of using very high frequency charging – 2.4 GHz – at low power to keep a constant trickle charge going at distances up to around 30 feet (10 meters) or so.  Effectively, the charger sends out RF signals and the phone harvests them. Meaning that your phone could charge unbeknownst to you while still in your pocket – no need to take it out and put it on some pad.

But of course, there’s always a “but.” And, in this case, it was the antenna: as in, you needed one for this. Actually, you needed more than one, since they use a phased approach. In addition to the antennas that are already in your phone. A clear real-estate challenge.

Well, this year, they just announced that they can now leverage the existing WiFi and Bluetooth antennas that are already in the phone. There are some required circuit and firmware changes, but they claim no additional components. In fact, they say that this approach can actually save space: in a world with lots of Cota chargers, you could make do with a smaller battery, since it would be frequently topped up as you moved around town.

You can learn more in their announcement.

Leave a Reply

featured blogs
Apr 25, 2024
Structures in Allegro X layout editors let you create reusable building blocks for your PCBs, saving you time and ensuring consistency. What are Structures? Structures are pre-defined groups of design objects, such as vias, connecting lines (clines), and shapes. You can combi...
Apr 25, 2024
See how the UCIe protocol creates multi-die chips by connecting chiplets from different vendors and nodes, and learn about the role of IP and specifications.The post Want to Mix and Match Dies in a Single Package? UCIe Can Get You There appeared first on Chip Design....
Apr 18, 2024
Are you ready for a revolution in robotic technology (as opposed to a robotic revolution, of course)?...

featured video

How MediaTek Optimizes SI Design with Cadence Optimality Explorer and Clarity 3D Solver

Sponsored by Cadence Design Systems

In the era of 5G/6G communication, signal integrity (SI) design considerations are important in high-speed interface design. MediaTek’s design process usually relies on human intuition, but with Cadence’s Optimality Intelligent System Explorer and Clarity 3D Solver, they’ve increased design productivity by 75X. The Optimality Explorer’s AI technology not only improves productivity, but also provides helpful insights and answers.

Learn how MediaTek uses Cadence tools in SI design

featured paper

Designing Robust 5G Power Amplifiers for the Real World

Sponsored by Keysight

Simulating 5G power amplifier (PA) designs at the component and system levels with authentic modulation and high-fidelity behavioral models increases predictability, lowers risk, and shrinks schedules. Simulation software enables multi-technology layout and multi-domain analysis, evaluating the impacts of 5G PA design choices while delivering accurate results in a single virtual workspace. This application note delves into how authentic modulation enhances predictability and performance in 5G millimeter-wave systems.

Download now to revolutionize your design process.

featured chalk talk

Shift Left with Calibre
In this episode of Chalk Talk, Amelia Dalton and David Abercrombie from Siemens investigate the details of Calibre’s shift-left strategy. They take a closer look at how the tools and techniques in this design tool suite can help reduce signoff iterations and time to tapeout while also increasing design quality.
Nov 27, 2023
20,180 views