editor's blog
Subscribe Now

Two Weeks of MEMS and Sensors

Cornucopia.png

The last couple weeks have involved two events with sensors center-stage. The MEMS Executive Congress is a confab of executives from the MEMS industry (and some non-MEMS companies), put on by the MEMS Industry Group (MIG). It’s been around for years.

TSensors, by contrast, started last year as a push by MEMS luminary Janusz Bryzek to identify and eliminate roadblocks to achieving sensor volumes in the trillions (the “T” in “TSensors” is for “trillion.”) While the MIG event tends to involve a conventional conference pace (hopefully with unconventional new ideas), TSensors involves two days of rapid-fire presentations (18 minutes to present, 2 minutes of questions… the timer is ticking!).

I learned lots of new things at both events, and I’ll be rolling out details over time. But, backing up a level, I wanted to take note of the tone taken in particular by TSensors.

The TSensors theme was “Abundance,” leveraging the popular book by Peter Diamandis. First of all, the tone of the book (which I’ll freely admit I haven’t read myself) is said to be highly optimistic – a refreshing take in a time when things don’t always feel like they’re going well.

But the other thing that I came away with was a renewed sense of engineering doing things that help the world. Frankly, some of the goals – like access by all to health care – might be viewed as problematic in some corners. Be that as it may, it felt good to think about the impact of our work on real people.

It’s not like money left the equation; heck, one of the repeated themes was the need to reduce sensor costs so that we can do these things while still rewarding folks for their innovations; it won’t work otherwise. But the difference was that the money, while necessary and important, wasn’t the be-all end-all goal in and of itself. It’s an enabler, not the final result.

Whether the bean counters strip all the hippie-dippy crap by the time this turns from PowerPoint to a business plan remains to be seen. But it’s good to look around occasionally and notice that we do some good work.

And there’s lots more good work to be done.

Leave a Reply

featured blogs
Apr 23, 2024
Do you think you are spending too much time fine-tuning your SKILL code? As a SKILL coder, you must be aware that producing bug-free and efficient code requires a lot of effort and analysis. But don't worry, there's good news! The Cadence Virtuoso Studio platform ha...
Apr 23, 2024
We explore Aerospace and Government (A&G) chip design and explain how Silicon Lifecycle Management (SLM) ensures semiconductor reliability for A&G applications.The post SLM Solutions for Mission-Critical Aerospace and Government Chip Designs appeared first on Chip ...
Apr 18, 2024
Are you ready for a revolution in robotic technology (as opposed to a robotic revolution, of course)?...

featured video

MaxLinear Integrates Analog & Digital Design in One Chip with Cadence 3D Solvers

Sponsored by Cadence Design Systems

MaxLinear has the unique capability of integrating analog and digital design on the same chip. Because of this, the team developed some interesting technology in the communication space. In the optical infrastructure domain, they created the first fully integrated 5nm CMOS PAM4 DSP. All their products solve critical communication and high-frequency analysis challenges.

Learn more about how MaxLinear is using Cadence’s Clarity 3D Solver and EMX Planar 3D Solver in their design process.

featured chalk talk

IoT Data Analysis at the Edge
No longer is machine learning a niche application for electronic engineering. Machine learning is leading a transformative revolution in a variety of electronic designs but implementing machine learning can be a tricky task to complete. In this episode of Chalk Talk, Amelia Dalton and Louis Gobin from STMicroelectronics investigate how STMicroelectronics is helping embedded developers design edge AI solutions. They take a closer look at the benefits of STMicroelectronics NanoEdge-AI® Studio and  STM32Cube.AI and how you can take advantage of them in your next design. 
Jun 28, 2023
34,319 views