editor's blog
Subscribe Now

Optimizing at the Cellphone Antenna

So you run across an announcement from Imec that they’ve presented a circuit at ISSCC that involves tuning to match changing antenna impedances in cell phones. And if you’ve been hanging out in the same places I have, you might have the following reaction: “Hey, this is what some MEMS guys are doing as well! Fight! Fight! Fight!”

Turns out it’s not quite that simple. I’d feel like it was just another day of me discovering yet another knowledge gap, but I wasn’t the only one conflating two concepts. Conversations with Cavendish Kinetics and WiSpry helped me pry the two issues apart.

You may recall coverage we’ve done of both WiSpry and Cavendish Kinetics on the MEMS side and Peregrine on the SoS side. They make capacitor arrays that can be configured as variable capacitors. The first two guys use MEMS switches; Peregrine uses electrical.

What problems do they solve? They help tune the antenna as conditions drift on the phone (grip changes etc.). In fact, even this conflates two things, as we covered before: both matching changing antenna impedances and recentering the resonance of the antenna to ensure that the strongest possible signals enter the phone.

This cell phone repair notes, critically, that frequency centering can’t be done too tightly: full duplex on your cellphone is achieved by placing receive and transmit on two slightly different frequencies so that they don’t interfere with each other. So the antenna response has to be wide enough to provide good performance at both frequencies.

Meanwhile, Imec is actually working on something different. The duplexer in the phone separates out the receive and transmit signal paths. Filters are typically implemented using relatively bulky surface acoustic wave (SAW) or thin-film bulk acoustic resonator ((T)FBAR) devices. Imec wanted to try instead to use an electrical-balancing (EB) technique, with the initial goal of simplifying the circuit.Imec_ISSCC_image.png

The high-level concept they’re exploring was actually used in the original telephone: taking a combined full duplex signal, consisting of mixed receive and transmit, and subtracting out the transmit signal (which you know because you’re at its origin) to get the pure receive signal. While that was a simple thing on old phones at voice frequency, it’s apparently not so easy up in the many-megahertz range with changing conditions. The three challenges in particular are isolation between receive and transmit, linearity, and insertion loss – and managing these in the face of changing antenna impedance.

In this particular project, Imec tackled the linearity and insertion loss as a step towards a commercially-viable EB duplexer. This is distinct from optimizing the antenna; they’re complementary solutions.

That’s all well and good, but there’s more promise if this all works out. If you can effectively isolate receive and transmit through subtraction, then you no longer need to place the signals on different frequencies. In fact, there was a paper presented at ISSCC by Columbia University that claims to have done just that: run receive and transmit at the same frequency. (Unfortunately I missed ISSCC this year due to illness and didn’t see the presentation; I received no response to a request for more information from Columbia).

And here’s the big payoff: if we can combine signals at one frequency, then instead of receive on one and transmit on the other, we can have both on both – we’ve doubled our capacity just like that.

So a relatively obscure-sounding topic (believe me, reading the Imec paper got me lost pretty quickly) may turn out to have rather astonishing consequences. We might eventually return to the old telephone approach that used to work so well.

The Imec paper can be found here (behind a paywall).

 

(Image courtesty Imec)

Leave a Reply

featured blogs
Mar 28, 2024
'Move fast and break things,' a motto coined by Mark Zuckerberg, captures the ethos of Silicon Valley where creative disruption remakes the world through the invention of new technologies. From social media to autonomous cars, to generative AI, the disruptions have reverberat...
Mar 26, 2024
Learn how GPU acceleration impacts digital chip design implementation, expanding beyond chip simulation to fulfill compute demands of the RTL-to-GDSII process.The post Can GPUs Accelerate Digital Design Implementation? appeared first on Chip Design....
Mar 21, 2024
The awesome thing about these machines is that you are limited only by your imagination, and I've got a GREAT imagination....

featured video

We are Altera. We are for the innovators.

Sponsored by Intel

Today we embark on an exciting journey as we transition to Altera, an Intel Company. In a world of endless opportunities and challenges, we are here to provide the flexibility needed by our ecosystem of customers and partners to pioneer and accelerate innovation. As we leap into the future, we are committed to providing easy-to-design and deploy leadership programmable solutions to innovators to unlock extraordinary possibilities for everyone on the planet.

To learn more about Altera visit: http://intel.com/altera

featured chalk talk

Switch to Simple with Klippon Relay
In this episode of Chalk Talk, Amelia Dalton and Lars Hohmeier from Weidmüller explore the what, where, and how of Weidmüller's extensive portfolio of Klippon relays. They investigate the pros and cons of mechanical relays, the benefits that the Klippon universal range of relays brings to the table, and how Weidmüller's digital selection guide can help you choose the best relay solution for your next design.
Sep 26, 2023
23,719 views