editor's blog
Subscribe Now

Ban Power Consumption

“How much power does it consume?”

This has been a key question ever since I started work as a product engineer many years ago. Heck, back then we even published power consumption numbers, although we used ICC as a proxy – we didn’t actually publish power, but you could easily do the multiplication with VCC to get it. (Yes, this was bipolar.)

These days, the concept is even more important, what with all the focus on battery-powered whats-itses. But in deconstructing a lot of what’s going on now, there’s an interesting nuance coming to the fore: energy vs. power.

  • Energy is a “thing.” It’s something physical that has a measurable quantity.
  • Power, by contrast, is not a thing; it represents the rate of flow of a thing, namely energy.

This is more than just an academic difference. Batteries and fuel cells can store more energy than a supercapacitor can, but they release that energy at a slower rate than the supercap. So one is capable of higher energy capacity; the other of higher power. The distinction actually matters.

So I find myself tripping more and more over the familiar phrase, “power consumption.” Power isn’t a “thing,” so it can’t be consumed. Energy is a “thing,” and it can be consumed.

So “power consumption” makes no conceptual sense; “energy consumption” makes a ton of sense.

An electronic device consumes energy, but, from a practical standpoint, you can’t know the energy consumed until you know how long you’ve run the device. And you have to be able to serve up the energy to the device from your energy store at the rate the device expects, or else you’ll starve it. So “power” is ultimately involved as a critical device requirement; energy consumption not so much.

So if “power consumption” is off the table, “power requirement” seems a suitable replacement.

I will therefore labor to use either “energy consumption” or “power requirement” henceforth.

And no, I don’t expect the world to follow. (One of my many quixotic attempts to apply logic to language… like the perennial abuse of the plural of “die” and the silly overuse of @…)

Leave a Reply

featured blogs
Apr 25, 2024
Structures in Allegro X layout editors let you create reusable building blocks for your PCBs, saving you time and ensuring consistency. What are Structures? Structures are pre-defined groups of design objects, such as vias, connecting lines (clines), and shapes. You can combi...
Apr 25, 2024
See how the UCIe protocol creates multi-die chips by connecting chiplets from different vendors and nodes, and learn about the role of IP and specifications.The post Want to Mix and Match Dies in a Single Package? UCIe Can Get You There appeared first on Chip Design....
Apr 18, 2024
Are you ready for a revolution in robotic technology (as opposed to a robotic revolution, of course)?...

featured video

How MediaTek Optimizes SI Design with Cadence Optimality Explorer and Clarity 3D Solver

Sponsored by Cadence Design Systems

In the era of 5G/6G communication, signal integrity (SI) design considerations are important in high-speed interface design. MediaTek’s design process usually relies on human intuition, but with Cadence’s Optimality Intelligent System Explorer and Clarity 3D Solver, they’ve increased design productivity by 75X. The Optimality Explorer’s AI technology not only improves productivity, but also provides helpful insights and answers.

Learn how MediaTek uses Cadence tools in SI design

featured paper

Designing Robust 5G Power Amplifiers for the Real World

Sponsored by Keysight

Simulating 5G power amplifier (PA) designs at the component and system levels with authentic modulation and high-fidelity behavioral models increases predictability, lowers risk, and shrinks schedules. Simulation software enables multi-technology layout and multi-domain analysis, evaluating the impacts of 5G PA design choices while delivering accurate results in a single virtual workspace. This application note delves into how authentic modulation enhances predictability and performance in 5G millimeter-wave systems.

Download now to revolutionize your design process.

featured chalk talk

PIC® and AVR® Microcontrollers Enable Low-Power Applications
Sponsored by Mouser Electronics and Microchip
In this episode of Chalk Talk, Amelia Dalton and Marc McComb from Microchip explore how Microchip’s PIC® and AVR® MCUs are a game changer when it comes to low power embedded designs. They investigate the benefits that the flexible signal routing, core independent peripherals, and Analog Peripheral Manager (APM) bring to modern embedded designs and how these microcontroller families can help you avoid a variety of pitfalls in your next design.
Jan 15, 2024
14,280 views