industry news
Subscribe Now

Si-Ware Systems Introduces First Fully Integrated Chip-Sized Spectral Sensor for Industrial and Consumer Markets

LOS ANGELES, January 24, 2017 – Si-Ware Systems (SWS), a premier provider of IC and MEMS-based solutions for industrial and consumer applications, today introduced the first integrated micro-spectrometer for broad industrial and consumer use. The product, NeoSpectra™ Micro, is a small, chip-scale, near infra-red (NIR) spectral sensor that quickly analyzes materials onsite without the need to send samples to a lab, enabling dramatic time savings and accurate, actionable data in the field or on the plant floor.

The device is small enough and thin enough to be incorporated into a smart phone case or designed into an existing mobile product. Product applications include scanning for food safety, and evaluating soil health, oil and gas composition, and pharmaceutical purity. Delivering the same functionality as conventional “bench-top” spectrometers in labs, the integrated NeoSpectra Micro brings to end-users the ability to immediately quantify composition, detect impurities and ascertain quality, speeding analysis of samples from days to minutes without the need for offsite lab verification.

NeoSpectra Micro builds on the success of the popular and cost-effective NeoSpectra spectral sensing module used by system integrators for development of industry-specific hand-held and inline spectrometer applications. The device is currently in use in agriculture, petrochemical, and healthcare industries

A Real Spectrometer — at Component Size

NeoSpectra Micro for the first time brings high performance spectroscopy to the size and cost of a sensor component.  At 18x18mm and only 4mm thick in a self-contained package, it can now be easily incorporated into consumer electronic products. Until now, spectroscopy and material analysis have been notoriously absent from consumer applications due to size, form factor and cost concerns.

“Now with NeoSpectra Micro, high performance material analysis can be a reality in the consumer electronics world,” said Scott Smyser, executive vice president at Si-Ware Systems. “In the same way that inertial sensors, accelerometers and gyros became small enough and low-cost enough for consumer electronic products — enabling a host of applications for motion sensing — NeoSpectra Micro will open up new and unprecedented applications for material analysis.

Large Unmet Need for Material Analysis

According to Paris-based market research firm Tematys, market size for compact spectrometers is estimated at $655 million for 2016 and will grow to almost $1B in 2021. The research firm forecasts that consumer applications will see have some of the largest growth at a 54% Compounded Annual Growth Rate (CAGR) from 2015 to 2021.

NeoSpectra Micro can be an effective solution for original equipment manufacturers (OEMs) targeting the consumer markets, since the integrated device is very similar to components in terms of size and cost. The tiny package includes all the system components: the MEMS interferometer, the photodetector, the light source, and also the electronics chips that perform system control and data processing. This facilitates integration, reduces development risks for system developers, and enables faster testing in different application environments.

Versatility is Key

NeoSpectra Micro not only offers an unprecedented wide spectral range that makes it suitable for many industries, but it is also the only chip-sized solution that operates at higher NIR wave length ranges (higher than 1,150 nm up to 2,500 nm). This extended range enables measurement of more materials with higher accuracy. In addition, it allows measuring samples in different form factors including particles, flat surfaces and even ground samples with no need for sample preparation.

“There is a pressing unmet need for rapid material analysis and actionable data in a broad range of applications, from consumer and wearables to industrial in-line and on-site quality control and scientific applications,” said Bassam Saadany, Optical MEMS business unit manager at SWS. “Developing a tiny spectrometer at a sensor price point, for out-of-the-box use across many sectors, requires a wide spectral range at the higher end of Near InfraRed. This places NeoSpectra above and beyond any other offerings on the market.”

NeoSpectra Micro Enabling Smartphones, Wearables and IoT

Having a low-cost, miniaturized NIR spectral sensor opens the door for a new wave of usage models for NIR spectroscopy. To showcase the potential of NeoSpectra Micro at Photonics West at the end of January, SWS has designed it into an iPhone case and developed a demonstration iPhone app. The demo app will scan and measure food and coffee to accurately detect and quantify such elements as gluten and caffeine levels.  The iPhone case was developed by XPNDBLS, and the spectral analysis algorithms were developed by GreenTropism.

“We are excited to add NeoSpectra Micro to our product portfolio. We believe it will change the way we perceive spectroscopy, taking it out of the lab environment and bringing it into consumer hands.” said Smyser. “Unlike other spectral sensor solutions out there, NeoSpectra is the first chip-scale spectral sensor with the high performance and reliability known for FT-IR spectrometers, the de-facto standard of high precision spectroscopy.”

In addition to smartphone-based spectrometers, NeoSpectra Micro can also be designed in to wearable devices, where NIR spectroscopy can non-invasively measure biochemistries in the body including glucose and ethanol/alcohol.  NeoSpectra Micro’s size and cost now enables NIR spectroscopy for the next wave of sensing for the human body, or even as smart sensors in Internet of Things (IoT) applications.

How NeoSpectra Works

NeoSpectra products are a built around low-cost, miniaturized, Fourier Transform InfraRed (FT-IR) spectral sensors that are based on MEMS technology. The sensors determine the spectral content of the input light, and generates spectrum data corresponding to the measured light. Today, NeoSpectra sensors operate in the NIR spectral range between 1,100nm and 2,500nm, enabling material composition analysis and identification in a wide range of application areas.  NeoSpectra technology allows for operation in the mid infra-red (MIR) and future-generation products will offer sensing in the MIR.

Availability and Pricing

Prototypes and development kits for NeoSpectra Micro will be available in Q1 of this year, with production starting in Q4. Pricing is targeted at $100 in high volumes.

SWS at Photonics West

SWS will exhibit its NeoSpectra sensors and demo the iPhone case incorporating NeoSpectra Micro at Photonics West in San Francisco being held next week, January 31st through February 2nd. SWS’s booth is #5164, North Hall, in the Moscone Center.

SWS will also host a product demo: New chip-sized NIR spectral sensor enabling consumer applications. In this demo, SWS will provide more detail on NeoSpectra Micro and discuss the analysis done with the iPhone case. The demo will take place on Thursday February 2nd at 12PM in Demo Area 2, North Hall.

About GreenTropism

GreenTropism (www.greentropism.com) is an innovative company specialized in embedded software in the field of mass market and industrial spectroscopy. The company brings industry professionals easy-to-use, predictive and accurate data analysis algorithms that instantaneously analyze the organic matter, providing precise results to drive any application or command control system.

About XPNDBLS

XPNDBLS (pronounced “expandables” (www.xpndbls.com) is a new tech start-up company based in Lake Forest, CA. XPNDBLS is focused on developing smart phone accessories targeted to professional and industrial use.

About Si-Ware Systems

Si-Ware Systems (SWS) is an independent fabless semiconductor company that is fostering silicon innovation. SWS has two main businesses – ASIC Solutions and Optical MEMS Technology. ASIC Solutions provides custom ASIC development and supply, specializing in analog/mixed-signal and RF design. Focus areas of expertise for ASICs include sensor interfaces and MEMS, wireless, timing, and power management. Optical MEMS Technology has developed the worlds’ first single-chip FT-IR spectrometer under the brand name NeoSpectra™ (www.neospectra.com), using its unique platform – Silicon integrated Micro Optical Systems Technology (SiMOST™), that allows the creation of multiple optical components on silicon. SWS also incubates new and innovative semiconductor technology to bring to market, such an all-silicon Self Compensating Oscillator (SCO™). For more information, please visit www.si-ware.com

 

Leave a Reply

featured blogs
Mar 28, 2024
The difference between Olympic glory and missing out on the podium is often measured in mere fractions of a second, highlighting the pivotal role of timing in sports. But what's the chronometric secret to those photo finishes and record-breaking feats? In this comprehens...
Mar 26, 2024
Learn how GPU acceleration impacts digital chip design implementation, expanding beyond chip simulation to fulfill compute demands of the RTL-to-GDSII process.The post Can GPUs Accelerate Digital Design Implementation? appeared first on Chip Design....
Mar 21, 2024
The awesome thing about these machines is that you are limited only by your imagination, and I've got a GREAT imagination....

featured video

We are Altera. We are for the innovators.

Sponsored by Intel

Today we embark on an exciting journey as we transition to Altera, an Intel Company. In a world of endless opportunities and challenges, we are here to provide the flexibility needed by our ecosystem of customers and partners to pioneer and accelerate innovation. As we leap into the future, we are committed to providing easy-to-design and deploy leadership programmable solutions to innovators to unlock extraordinary possibilities for everyone on the planet.

To learn more about Altera visit: http://intel.com/altera

featured chalk talk

Maximizing High Power Density and Efficiency in EV-Charging Applications
Sponsored by Mouser Electronics and Infineon
In this episode of Chalk Talk, Amelia Dalton and Daniel Dalpiaz from Infineon talk about trends in the greater electrical vehicle charging landscape, typical block diagram components, and tradeoffs between discrete devices versus power modules. They also discuss choices between IGBT’s and Silicon Carbide, the advantages of advanced packaging techniques in both power discrete and power module solutions, and how reliability is increasingly important due to demands for more charging cycles per day.
Dec 18, 2023
13,794 views