February 13, 2017

Coventor Unveils New Scientific Findings on Lithography Processing For Improved Semiconductor Scalability and Performance

At SPIE Advanced Lithography 2017, Coventor Will Present Results of Studies to Increase Density and Yield of Next-Generation Semiconductor Devices

CARY, NC-- February 13, 2017 - Coventor®, Inc., the leading supplier of virtual fabrication solutions for semiconductor devices and micro-electromechanical systems (MEMS), will present findings from its research on advanced semiconductor fabrication processes at SPIE Advanced Lithography 2017.  The results of these studies provide insight into techniques for advancing the state-of-the-art in semiconductor technology through use of new and emerging photomask,  lithography and process technologies.   

“The semiconductor industry is continually striving to scale device performance and density up while driving costs down,” said Dr. David Fried, CTO of Coventor.   “With advances in lithography, processing techniques and device architectures, being able to predict the structural behavior of complex 3D devices before any physical wafers are fabricated is essential.  Internally within Coventor and around the industry with our partners, virtual fabrication using our SEMulator3D modeling platform is demonstrating the ability to increase semiconductor device density and yield through control of process variation.”     

Coventor conducted a series of studies aimed at understanding semiconductor lithography and manufacturing issues that could affect yield and device density at future technology nodes (N7 and lower).  Coventor and its partners will present findings from these studies in three presentations at this year’s SPIE Advanced Lithography conference.

In one of its studies, Coventor worked with a team from Imec to compare the effects of variability on different semiconductor fabrication processes.  The team used Coventor’s SEMulator3D process modeling software to simulate the fabrication of hundreds of virtual semiconductor wafers, in an attempt to improve advanced semiconductor processing techinques.  They used modeling data to compare self-aligned and fully-self-aligned semiconductor via processes, using a calibrated model for Imec’s N7 BEOL processing technology. The results indicate that fully self-aligned vias provide better metalization and contact area control, leading to higher density semiconductor devices.  Coventor’s findings from its work with Imec will be presented in a session entitled  “EPE Analysis of sub-N10 BEOL structures with Coventor’s SEMulator3D” (Paper 10145-81, Tuesday, February 28, 2017 at 6:00 to 8:00 pm).

Another Coventor study will be presented in a session entitled “Investigation of 3D Photoresist Profile Effect in Self-Aligned Patterning Through Virtual Fabrication”  (Paper 10147-15, Tuesday, February 28, 2017 at 4:10 to 6:00 p.m.).  In this study, the authors analyzed the effects of photoresist sidewall profile and line edge roughness on both front-end of line (FEOL) and back-end of line (BEOL) lithography schemes.  The authors determined that the electrical characteristics and expected device density of advanced semiconductor devices (such as FinFETs) will be negatively impacted during semiconductor manufacturing, unless tight exposure and development controls for these parameters are in place during semiconductor production.

Thirdly, Dr. David Fried will present a keynote session titled:  “Technology Development: the "In Between"  (Paper 10147-1, Tuesday, February 28, 2017 at 8:40 - 9:20 am).  Dr. Fried will discuss the risk and complexity of the time “in between” research ideas, new technologies and actual products in the semiconductor industry, and review ideas for addressing these challenges.

Coventor and its customers have been using virtual fabrication to deepen the understanding of what’s required to incorporate new lithography technologies.   The latest version of Coventor’s SEMulator3D Virtual Fabrication Platform enables process modeling for FinFETs, 3D NAND Flash, BEOL, Nanowires, 3D-IC, FDSOI, DRAM, and other next generation processes.  The company will demonstrate the latest version of its SEMulator3D Virtual Fabrication Platform, in its booth (#306).   

SPIE Advanced Lithography is the premier conference for the lithography community. For over 40 years, SPIE has brought together this community to address challenges presented in fabricating next-generation integrated circuits.

About Coventor

Coventor, Inc. is the market leader in automated design solutions for developing semiconductor process technology, as well as micro-electromechanical systems (MEMS). Coventor serves a worldwide customer base of integrated device manufacturers, memory suppliers, fabless design houses, independent foundries, and R&D organizations. Its SEMulator3D modeling and analysis platform is used for fast and accurate ‘virtual fabrication’ of advanced manufacturing processes, allowing engineers to understand manufacturing effects early in the development process and reduce time-consuming and costly silicon learning cycles. Its MEMS design solutions are used to develop MEMS-based products for automotive, aerospace, industrial, defense, and consumer electronics applications, including smart phones, tablets, and gaming systems. The company is headquartered in Cary, North Carolina and has offices in California’s Silicon Valley, Waltham, Massachusetts, and Paris, France. More information is available at http://www.coventor.com.


IoT & MEMS. Embedded. Semiconductor.

    submit to reddit  


You must be logged in to leave a reply. Login »

Related Articles

Self-Driving Cars: Unofficial Views

What Are Individuals Thinking About?

by Bryon Moyer

Most of what we see about the upcoming self-driving car phenomenon comes from the industry. Press releases and contributed articles may disagree on timing and...

Electromagnetic Domination

Spectral Allocation and the Next Generation of Electronic Warfare

by Amelia Dalton

What has the electromagnetic spectrum done for you lately? Im guessing not a lot. But it can. In this weeks Fish Fry, I...

Cars, Connection and Silicon

Automotive Thoughts from Embedded World

by Dick Selwood

How do you sum up embedded world, this year spread over three days, with nearly 40,000 people and over 1,000 exhibitors, all around a theme of Securely...

The Persistence of Memory

Performance-IPs MRO speeds up slow memories

by Jim Turley

Q: When is a cache not a cache?

A: When its a Memory Request Optimizer.

If that sounds tautological (arent all...

Magnitudes of Mystery

Digital Systems that Nobody Designs

by Kevin Morris

Over the past five-plus decades, Moores Law has taken us on a remarkable rocket ride of complexity. With the number of transistors on a...

  • Find more on this topic
  • Industry News RSS
  • Comment on this article
  • Print This

Login Required

In order to view this resource, you must log in to our site. Please sign in now.

If you don't already have an acount with us, registering is free and quick. Register now.

Sign In    Register