industry news
Subscribe Now

Renesas Electronics’ New Microcontroller Solution Brings Unprecedented Levels of Integration and Reduced Power Consumption during Standby Mode by Approx. 30% for Home and Industrial Sensing Systems

Düsseldorf, 22 January 2015 – Renesas Electronics, a premier supplier of advanced semiconductor solutions, today announced the availability of the RL78/I1D Group of microcontrollers (MCUs). The RL78/I1D Group realizes the industry’s lowest power consumption and integrates a wealth of analog functions usable in various sensing applications. More specifically, the RL78/I1D functions are optimized for detectors that sense minute variations in the output of sensors used to monitor for smoke, gas, and motion or vibrations.

The ability to use functions such as the data transfer controller (DTC), event link controller (ELC), and data operation circuit (DOC) to perform data processing and transfer, and implement long-interval timers, all without the need for CPU intervention, helps to further reduce power consumption during intermittent system operation by approximately 30 percent. In the low-power operation mode, the RL78/I1D Group has an operating current level much lower than that of competing products, and it wakes up from the stop-mode state very quickly. The MCU alone can make a substantial contribution to the overall power efficiency of the system.

To help reduce system cost and allow for greater compactness, the new RL78/I1D Group integrates general-purpose differential input operational amplifiers, a 12-bit A/D converter, and a comparator. This brings together on a single chip all the analog peripheral functions required to interface with sensors.

Key Features of the RL78/I1D Group of MCUs:

1) Innovative snooze mode functions enabling data processing and transfer without CPU intervention

The data transfer controller (DTC) or event link controller (ELC) can be used to activate sensors, activate operational amplifiers to amplify sensor signals, and transfer A/D conversion results. The data operation circuit (DOC) compares the transferred A/D conversion results and threshold values to determine whether the CPU needs to be activated. These innovative snooze mode functions operate without CPU intervention in standby mode and reduce power consumption by approximately 30 percent in products such as fire detectors, gas detectors, broken glass detectors, and security systems (human sensors).

2) Dynamic switching of the operation mode to match the system status

The RL78/I1D Group allows dynamic switching between low-power operation mode and high-speed operation mode to match the system status. In low-power operation mode with a power supply voltage of 1.8 V ? VDD ? 3.6 V and an operating frequency of 1 MHz, the operating current is only 124 ?A (typ.), far lower than competing products. In addition, wake-up from the stop-mode state occurs in just 4?s (max.) when the medium-speed on-chip oscillator clock (4 MHz) is used as the main system clock. This cuts power consumption during wake-up and enables the microcontroller on its own to contribute to the overall power efficiency of the system.

3) On-chip analog peripheral functions necessary for detecting minute sensor signals

Depending on the package, there are four differential input operational amplifiers, each with two input pins and one output pin, up to seventeen channels for the A/D converter and two analog comparators. By bringing together on a single chip the analog functions required by applications such as fire detectors, gas detectors, broken glass detectors, and security systems, the RL78/I1D Group greatly contributes to lower system cost and greater compactness.

Availability

The RL78/I1D Group comprises 13 product versions with package pin counts ranging from 20 to 48 pins and on-chip flash memory capacities of 8, 16, and 32 kilobytes (KB). Mass production has already begun and is expected to reach a combined volume of 400,000 units per month by December 2015. (Availability is subject to change without notice.)

Refer to the separate sheet for the main specifications of the RL78/I1D Group of MCUs.

See more product information

About Renesas Electronics Europe

Renesas Electronics is the world’s number one supplier of microcontrollers and a premier supplier of advanced semiconductor solutions, including system-on-chip and a wide range of discrete analogue and power devices. Established in 2010, Renesas Electronics combines the collective semiconductor expertise of Hitachi, Mitsubishi Electric and NEC Electronics, encapsulating more than 200 years’ experience.

Renesas’ products are the result of decades of research and investment into semiconductor technology and customer solutions. Today, they provide pioneering platforms for the advancement of the Smart Society, embedding intelligence, connectivity, safety and security in solutions for cars, homes, buildings and factories. In Europe, Renesas complements its cutting-edge technology with resources that foster customer proximity and span the entire product lifecycle. These include the European Technology Centre, which designs innovative solutions specifically for Europe, and the European Quality Centre in Düsseldorf, which provides technical support to customers throughout the region. Renesas also operates an effective ecosystem, comprising the industry’s largest local support network and an extensive network of over 800 hardware and software alliance partners.

Headquartered in Japan, Renesas Electronics has subsidiaries in 20 countries worldwide. More information is available atwww.renesas.eu 

Renesas Electronics Europe on http://twitter.com/Renesas_Europehttp://facebook.com/RenesasEurope and http://youtube.com/RenesasPresents

Leave a Reply

featured blogs
Mar 28, 2024
The difference between Olympic glory and missing out on the podium is often measured in mere fractions of a second, highlighting the pivotal role of timing in sports. But what's the chronometric secret to those photo finishes and record-breaking feats? In this comprehens...
Mar 26, 2024
Learn how GPU acceleration impacts digital chip design implementation, expanding beyond chip simulation to fulfill compute demands of the RTL-to-GDSII process.The post Can GPUs Accelerate Digital Design Implementation? appeared first on Chip Design....
Mar 21, 2024
The awesome thing about these machines is that you are limited only by your imagination, and I've got a GREAT imagination....

featured video

We are Altera. We are for the innovators.

Sponsored by Intel

Today we embark on an exciting journey as we transition to Altera, an Intel Company. In a world of endless opportunities and challenges, we are here to provide the flexibility needed by our ecosystem of customers and partners to pioneer and accelerate innovation. As we leap into the future, we are committed to providing easy-to-design and deploy leadership programmable solutions to innovators to unlock extraordinary possibilities for everyone on the planet.

To learn more about Altera visit: http://intel.com/altera

featured chalk talk

Portable Medical Devices and Connected Health
Decentralized healthcare is moving from hospitals and doctors’ offices to the patients’ home and office and in the form of personal, wearable, and connected devices. In this episode of Chalk Talk, Amelia Dalton and Roger Bohannan from Littelfuse examine the components, functions and standards for a variety of portable connected medical devices. They investigate how Littelfuse can help you navigate the development of your next portable connected medical design.
Jun 26, 2023
31,405 views