industry news
Subscribe Now

Holst Centre, imec and CARTAMUNDI Join forces to Create the Near Field Communication Chip of the Future

Eindhoven, the Netherlands and Leuven, Belgium—Nov. 19, 2014—Holst Centre, set up by the Belgian nanoelectronics research center imec and the Dutch research institute TNO, and Cartamundi NV, worldwide leader in production and sales of playing cards, promotional cards, casino cards, collector card games, and board games, have announced a collaboration to develop ultra-thin flexible near field communication (NFC) tags. The partners will develop these new NFC tags using metal-oxide (IGZO) thin-film transistor (TFT) technology on plastic film. The flexible chips will be integrated into game cards as a part of Cartamundi’s larger strategy of developing game cards for the connected generation.

Holst Centre, imec and Cartamundi engineers will look into NFC circuit design and TFT processing options, and will investigate routes for up-scaling of the production. By realizing the NFC tags using chips based on IGZO TFT technology on plastic film, the manufacturing cost can be kept low. Moreover, the ultra-thin and flexible form factor required for paper-embedded NFC applications can be realized.

Currently, Cartamundi NV embeds silicon-based NFC chips in their game cards, connecting traditional game play with electronic devices such as smartphones and tablets. The advanced IGZO TFT technology that will be used addresses the game card industry call for much thinner, more flexible and virtually unbreakable NFC chips. Such chips are essential to improve and broaden the applicability of interactive technology for game cards, compared to the currently-used silicon based NFC chips. Next to technical specifications, this next-generation of NFC tags will better balance manufacturing cost and additional functionalities.

Chris Van Doorslaer, CEO of Cartamundi, explains: “Cartamundi is committed to creating products that connect families and friends of every generation to enhance the valuable quality time they share during the day. With Holst Centre’s and imec’s thin-film and nano-electronics expertise, we’re connecting the physical with the digital which will enable lightweight smart devices with additional value and content for consumers.”

“Not only will Cartamundi be working on the NFC chip of the future, but it will also reinvent the industry’s standards in assembly process and the conversion into game cards,” says  Steven Nietvelt, chief innovation and marketing officer at Cartamundi. “All of this is part of an ongoing process of technological innovation inside Cartamundi. I am glad our innovation engineers will collaborate with the strongest technological researchers and developers in the field at imec and Holst Centre. We are going to need all expertise on board. Because basically what we are creating is game-changing technology.”

“Imec and Holst Centre aim to shape the future and our collaboration with Cartamundi  will do so for the future of gaming technology and connected devices,” says Paul Heremans, Department Director Thin Film Electronics at imec and Technology Director at the Holst Centre. “Chip technology has penetrated society’s daily life right down to game cards. We are excited to work with Cartamundi to improve the personal experience that gaming delivers.”

This press release can be downloaded at http://www2.imec.be/be_en/press/imec-news/imec-HolstCentre-Cartamundi.html

About Cartamundi

Cartamundi was established in 1970 and is able to boast more than 200 years of experience in the production and sales of playing cards and cards for games. The headquarters of Cartamundi is are located in Turnhout, Belgium. The group generated sales in 2013 of 195 million Euro with a workforce of 1.700 and with factories in Belgium, Germany, UK, Poland, USA, Brazil, Mexico, India and Japan, and 14 sales offices worldwide. Recently, Cartamundi acquired the 100% shareholding of France Cartes. In 2008, the company was awarded as Entrepreneur of the Year. Cartamundi has its own retail collection with licensed cards (such as Disney®, James Bond®, Hasbro®, Fifa®, etc.), but is also known for its promotional card collections, casino cards, collector cards (e.g. Yu-Gi- Oh!®) and cards for games (such as Uno®, Monopoly®) or the new concept iCards. These cards provide the connection between physical cards and the virtual world of the internet, smartphone, gaming consoles, etc.  The purpose of Cartamundi is “sharing the magic of playing together”.

About Holst Centre

Holst Centre is an independent open-innovation R&D centre that develops generic technologies for Wireless Autonomous Transducer Solutions and for Systems-in-Foil. A key feature of Holst Centre is its partnership model with industry and academia around shared roadmaps and programs. It is this kind of cross-fertilization that enables Holst Centre to tune its scientific strategy to industrial needs.
Holst Centre was set up in 2005 by imec (Flanders, Belgium) and TNO (The Netherlands) with support from the Dutch Ministry of Economic Affairs and the Government of Flanders. It is named after Gilles Holst, a Dutch pioneer in Research and Development and first director of Philips Research.
Located on High Tech Campus Eindhoven, Holst Centre benefits from the state-of-the-art on-site facilities. Holst Centre has over 180 employees from around 28 nationalities and a commitment from more than 45 industrial partners.
Visit us at www.holstcentre.com

About imec

Imec performs world-leading research in nanoelectronics and photovoltaics. Imec leverages its scientific knowledge with the innovative power of its global partnerships in ICT, healthcare and energy. Imec delivers industry-relevant technology solutions. In a unique high-tech environment, its international top talent is committed to providing the building blocks for a better life in a sustainable society. Imec is headquartered in Leuven, Belgium, and has offices in the Netherlands, Taiwan, US, China, India and Japan. Its staff of over 2,080 people includes more than 670 industrial residents and guest researchers. In 2013, imec’s revenue (P&L) totaled 332 million euro. Further information on imec can be found at www.imec.be. Stay up to date about what’s happening at imec with the monthly imec magazine, available for tablets and smartphones (as an app for iOS and Android), or via the website www.imec.be/imecmagazine
Imec is a registered trademark for the activities of IMEC International (a legal entity set up under Belgian law as a “stichting van openbaar nut”), imec Belgium (IMEC vzw supported by the Flemish Government), imec the Netherlands (Stichting IMEC Nederland, part of Holst Centre which is supported by the Dutch Government), imec Taiwan (IMEC Taiwan Co.) and imec China (IMEC Microelectronics (Shanghai) Co. Ltd.) and imec India (Imec India Private Limited).

 

 

 

Leave a Reply

featured blogs
Apr 18, 2024
Are you ready for a revolution in robotic technology (as opposed to a robotic revolution, of course)?...
Apr 18, 2024
See how Cisco accelerates library characterization and chip design with our cloud EDA tools, scaling access to SoC validation solutions and compute services.The post Cisco Accelerates Project Schedule by 66% Using Synopsys Cloud appeared first on Chip Design....
Apr 18, 2024
Analog Behavioral Modeling involves creating models that mimic a desired external circuit behavior at a block level rather than simply reproducing individual transistor characteristics. One of the significant benefits of using models is that they reduce the simulation time. V...

featured video

MaxLinear Integrates Analog & Digital Design in One Chip with Cadence 3D Solvers

Sponsored by Cadence Design Systems

MaxLinear has the unique capability of integrating analog and digital design on the same chip. Because of this, the team developed some interesting technology in the communication space. In the optical infrastructure domain, they created the first fully integrated 5nm CMOS PAM4 DSP. All their products solve critical communication and high-frequency analysis challenges.

Learn more about how MaxLinear is using Cadence’s Clarity 3D Solver and EMX Planar 3D Solver in their design process.

featured chalk talk

IoT Data Analysis at the Edge
No longer is machine learning a niche application for electronic engineering. Machine learning is leading a transformative revolution in a variety of electronic designs but implementing machine learning can be a tricky task to complete. In this episode of Chalk Talk, Amelia Dalton and Louis Gobin from STMicroelectronics investigate how STMicroelectronics is helping embedded developers design edge AI solutions. They take a closer look at the benefits of STMicroelectronics NanoEdge-AI® Studio and  STM32Cube.AI and how you can take advantage of them in your next design. 
Jun 28, 2023
33,824 views