industry news
Subscribe Now

100V Synchronous Forward Controller Regulates Output Voltage without an Opto-Coupler

MILPITAS, CA – August 20, 2014 – Linear Technology Corporation announces the LT8310, a primary-side synchronous forward controller. The LT8310 operates over an input voltage range of 6V to 100V, is targeted for power levels up to 200W and provides a drive signal for secondary-side synchronous rectification to improve efficiency.

Output voltage regulation of ±8% can be attained without the use of an opto-coupler. When an opto-coupler is used, ±1.5% regulation can be realized. A programmable volt-second clamp provides a safeguard for transformer reset that prevents saturation and protects the MOSFET. This function optimizes the transformer and MOSFET, reducing solution size.

The LT8310 computes the duty cycle required to create a constant VOUT in open loop applications, thereby simplifying the design. In closed loop applications, the LT8310 limits maximum VOUT if the opto-coupler path breaks open.

Additional features include programmable overcurrent protection, adjustable input undervoltage, overvoltage lockout and built-in thermal shutdown. The LT8310 has a programmable 100kHz to 500kHz operating switching frequency and can be synchronized to an external clock, enabling the use of a wide range of output inductor values and transformer sizes.

The LT8310 is available in a TSSOP-20 package with several pins removed for high voltage spacing. The LT8310 E- and I-grade versions operate from a -40°C to 125°C junction temperature. The LT8310 H grade is guaranteed to operate from a -40°C to 150°C operating junction temperature. The LT8310 MP grade is guaranteed to operate from -55°C to 150°C operating junction temperature. The 1,000-piece price starts at $2.99 each. For more information, visit www.linear.com/product/LT8310.

Summary of Features: LT8310

  • Wide VIN Range: 6V to 100V
  • Programmable Volt-Second Clamp
  • No Opto-Coupler Required
  • High Efficiency Synchronous Rectification
  • Short-Circuit Protection
  • Selectable Fixed Operating Frequency from 100kHz to 500kHz
  • Synchronizable to External Clock
  • Programmable OVLO & UVLO with Hysteresis
  • Extended & Industrial Grades: -40°C to 125°C Operating Junction Temp
  • Automotive Temp Grade: -40°C to 150°C Operating Junction Temp
  • Military Temp Grade: -55°C to 150°C Operating Junction Temp

The USA list pricing shown is for budgetary use only. International prices may differ due to local duties, taxes, fees and exchange rates.

About Linear Technology

Linear Technology Corporation, a member of the S&P 500, has been designing, manufacturing and marketing a broad line of high performance analog integrated circuits for major companies worldwide for over three decades. The Company’s products provide an essential bridge between our analog world and the digital electronics in communications, networking, industrial, automotive, computer, medical, instrumentation, consumer, and military and aerospace systems. Linear Technology produces power management, data conversion, signal conditioning, RF and interface ICs, µModule® subsystems, and wireless sensor network products. For more information, visitwww.linear.com.

, LT, LTC, LTM, Linear Technology, the Linear logo and µModule are registered trademarks of Linear Technology Corp. All other trademarks are the property of their respective owners.

Leave a Reply

featured blogs
Apr 19, 2024
In today's rapidly evolving digital landscape, staying at the cutting edge is crucial to success. For MaxLinear, bridging the gap between firmware and hardware development has been pivotal. All of the company's products solve critical communication and high-frequency analysis...
Apr 18, 2024
Are you ready for a revolution in robotic technology (as opposed to a robotic revolution, of course)?...
Apr 18, 2024
See how Cisco accelerates library characterization and chip design with our cloud EDA tools, scaling access to SoC validation solutions and compute services.The post Cisco Accelerates Project Schedule by 66% Using Synopsys Cloud appeared first on Chip Design....

featured video

MaxLinear Integrates Analog & Digital Design in One Chip with Cadence 3D Solvers

Sponsored by Cadence Design Systems

MaxLinear has the unique capability of integrating analog and digital design on the same chip. Because of this, the team developed some interesting technology in the communication space. In the optical infrastructure domain, they created the first fully integrated 5nm CMOS PAM4 DSP. All their products solve critical communication and high-frequency analysis challenges.

Learn more about how MaxLinear is using Cadence’s Clarity 3D Solver and EMX Planar 3D Solver in their design process.

featured chalk talk

Littelfuse Protection IC (eFuse)
If you are working on an industrial, consumer, or telecom design, protection ICs can offer a variety of valuable benefits including reverse current protection, over temperature protection, short circuit protection, and a whole lot more. In this episode of Chalk Talk, Amelia Dalton and Pete Pytlik from Littelfuse explore the key features of protection ICs, how protection ICs compare to conventional discrete component solutions, and how you can take advantage of Littelfuse protection ICs in your next design.
May 8, 2023
41,100 views